How To Use The Corvette C7 Tail Light Blackout Kit :

Clean the tail lights with rubbing alcohol to remove any dirt, grease, or debris. This will ensure that the adhesive on the blackout covers will adhere properly.

 Remove the red backing from the adhesive tape on the blackout covers. Be careful not to touch the adhesive with your fingers, as this will leave fingerprints.

 Align the blackout covers over the tail lights. Make sure that the covers are centered and that they are not overlapping.

Press the blackout covers firmly onto the tail lights. Use your hands to smooth out any air bubbles that may be trapped under the covers.

 Test the tail lights to make sure they function properly. Make sure that the brake lights, turn signals, and reverse lights all work as expected.