1. Check your manual: Different Dyson models have different filter types and cleaning requirements. Always refer to your manual for specific instructions.
2. Unplug and switch off: Before handling the filter, ensure your purifier is off and unplugged to avoid any accidents.
3. Locate the filter: Identify the location of your filter based on your model. It's usually behind a magnetic or latching cover.
4. Remove the filter: Carefully remove the filter following the instructions in your manual. Avoid touching the filter's filtering surfaces as much as possible.
5. Pre-wash (optional): Some models recommend tapping the filter gently to remove loose dust before washing. Check your manual for specific instructions.
6. Rinse the filter: Wash the filter under cold running water only. Never use hot water, detergent, or put it in the dishwasher or washing machine.
7. Squeeze gently: While rinsing, gently squeeze the filter to remove trapped dirt and water. Repeat until the water runs clear.
8. Air dry thoroughly: Place the filter upright in a well-ventilated, warm area away from direct sunlight or heat sources. Leave it for at least 24 hours until completely dry.
9. Reinstall the filter: Once the filter is completely dry, reinsert it carefully into your purifier following the manual's instructions.
10. Reset filter life (optional): Some models require resetting the filter life indicator after cleaning. Consult your manual for specific steps.