8 Step-by-Step Guide: How To Wire Running Lights On Tow Mirrors

Read Time:6 Minute, 32 Second

Tow mirrors are an essential accessory for anyone who frequently tows trailers or carries large loads. They allow drivers to see beyond the sides of their vehicles. Tow mirrors include running lights, which improve visibility and keep you safer on the road. This is a crucial feature.

Table of Contents

This step-by-step guide will show you how to wire running lights on tow mirrors on a 2014 Silverado model. This guide will help you install new trailer mirrors or upgrade your existing ones.

_{^{How to Wire Running Lights on Tow Mirrors}}– _{^{source image}} –_^Amazon

What are Running Lights?

Running lights, also called position lights or sidelights, illuminate while a vehicle is moving, usually at night or in low light. These lights serve two primary functions:

These lights enhance visibility, reduce accidents, and aid drivers, pedestrians, and cyclists. The vehicle’s length and width are visible to other drivers thanks to the running lights. These lights help others determine the vehicle’s size and position, especially in bad weather or low visibility.

Most countries require front running lights for nighttime visibility in poor or inclement weather. DRLs on some modern cars stay on while the engine is running. DRLs improve vehicle visibility during daytime glare or reduced contrast.

Drivers need to check their running lights to stay safe and out of trouble with the law.

What to Consider When Wiring Tow Mirror Running Lights

Before wiring, keep a few things in mind. First, check your local running light laws for tow mirrors. Some places have their own rules or needs. It’s crucial to understand your car’s electrical system and wiring diagrams. Learn how to Wire Running Lights on Tow mirrors to work. This will simplify installation. Finally, check that you have everything before starting.

_{^{How to Wire Running Lights on Tow Mirrors}}–

What Equipment Do You Need?

You will need the following tools to wire running lights on tow mirrors:

Tow mirrors with running lights: Purchase tow mirrors that are compatible with your vehicle’s make and model. Opt for white wall mirrors for a clean and sleek look.

Wiring harness: Look for a wiring harness that is designed specifically for your vehicle’s make and model. Chevrolet towing mirror wiring harnesses or GMC wiring harnesses are readily available for different models.

Wire connectors: These connect the wiring harness to the tow mirrors and the vehicle’s electrical system. Make sure to select connectors that work with the wiring configuration you have in mind.

Wire stripper and crimping tool: These tools will be needed to strip the insulation from the wires and crimp the connectors securely.

Electrical tape: Use electrical tape to insulate and protect the connections from moisture and damage.

Multimeter: You can test the electrical connections with a multimeter to make sure everything is functioning properly.

Now that you have all the equipment, let’s start wiring the running lights on the 2014 Silverado tow mirrors.

_{^{How to Wire Running Lights on Tow Mirrors}} – _{^{source image – Amazon}}

Step-by-step guide: Wiring running lights on 2014 Silverado tow mirrors

Start by disconnecting the negative terminal of your vehicle’s battery to prevent any electrical accidents.

Remove the existing side mirrors from your vehicle. This usually requires removing a few screws or bolts. Keep them safely aside, as you may need them later.
Now, Install your new tow mirrors carefully and securely. Follow the manufacturer’s instructions to install the product.
Locate the wiring harness for your side mirrors. This harness is usually tucked away behind the interior paneling. Gently remove the paneling to access the wiring harness.
Now you need to connect the tow mirrors’ wiring harness to the vehicle’s existing harness and match colors. Use wire connectors and a crimping tool to secure the connections.
Once the connections are secure, use electrical tape to wrap around the connectors. It will provide insulation and protection against moisture.
It’s time to reinstall the interior paneling and make sure everything is back in place.
Now, reconnect the negative terminal of your vehicle’s battery.
Test the running lights by turning on your vehicle’s headlights. The running lights on your side mirrors should illuminate.

Well done! You have successfully wired running lights to your tow mirrors. Enjoy the enhanced visibility and safety they provide.

_{^{How to Wire Running Lights on Tow Mirrors}}–

6 Safety Tips for How to Wiring Tow Mirror Running Lights

Before working on your car’s electrical system, disconnect the negative terminal. This will prevent electrical shocks or short circuits.

Follow the manufacturer’s instructions for installing and wiring your tow mirrors. Improper installation can lead to malfunctioning lights or damage to your vehicle.
Double-check all connections and ensure they are secure before reassembling any interior paneling. Loose connections can cause electrical issues or even fires.
Avoid cutting or splicing into the vehicle’s existing wiring harness unless absolutely necessary. Use a compatible wiring harness for your vehicle’s make and model.
For secure connections, use wire connectors and a crimping tool. Avoid using electrical tape alone, as it may come loose over time.
Properly insulate all connections using electrical tape. This will protect them from moisture, corrosion, and damage.
Test the running lights after installation to ensure they are working correctly. Check the connections and wiring diagram again if you have issues.

If you’re not sure about how to Wire Running Lights on Tow mirrors, hire a professional to assist you. A qualified technician can ensure a safe and proper installation.

Troubleshooting Common Wiring Issues

Even with careful installation, it is possible to encounter some common wiring issues. Tips for troubleshooting:

Dim or flickering lights: Check the connections between the tow mirrors and the vehicle’s wiring harness. Make sure the connections are secure and corrosion-free. Also, check the voltage output of your vehicle’s electrical system using a multimeter.

Lights not turning on: Double-check wiring connections. Make sure the wiring harness fits your car. If everything seems fine, check and replace the running light fuse.

When a light stays on after the car is off, a relay or short circuit may be to blame. Check the connections and wiring diagram to ensure proper wiring.

_{^{How to Wire Running Lights on Tow Mirrors}}

FAQ – _{^{How to Wire Running Lights on Tow Mirrors}}

Can I install tow mirrors with running lights on any vehicle?

Tow mirrors with running lights are designed to be compatible with specific vehicle makes and models. Ensure that you purchase tow mirrors that are compatible with your vehicle to ensure proper fitment and functionality.

Do I need any special tools to wire the running lights on the tow mirrors?

Electrical tape, a multimeter, wire strippers, and crimping tools are needed to complete this project. These tools will help you strip wires, secure connections, and test the electric system.

Can I wire running lights on tow mirrors without a wiring harness?

It’s possible to wire running lights without a harness, but it’s not advised. A safe and proper installation requires a compatible wiring harness for your vehicle’s make and model.

Are running lights on tow mirrors legal?

The legality of running lights on tow mirrors may vary depending on your jurisdiction. It’s important to know your local running light laws.

Conclusion about How to Wire Running Lights on Tow Mirrors

We have covered how to Wire Running Lights on Tow mirrors. Running lights can make a car safer and easier to see. As long as you follow the directions carefully and observe all safety measures. You can successfully install running lights on your side mirrors. If you’re unsure, consult your vehicle’s wiring diagram and get professional help. With properly wired running lights, you can have peace of mind knowing that you are maximizing safety on the road.