Do you want to remove a Halogen ceiling light bulbs from a wall fixture? However, you don’t know how to remove halogen bulbs from track Lighting Bulb. No worries, I will help you change a 2 pin halogen light bulb.
Sometimes, halogen light bulbs are inefficient and use energy. So, is it worth replacing halogen bulbs with LEDs? Switching to LEDs can save you money in the long run. LEDs are also more durable and last longer than halogen bulbs.
In this blog, we will discuss simple ways to change an Edison Halogen 50 Bulb halogen ceiling lights from track lighting. Also guide you how to replace my incandescent or halogen bulbs with LED.
Steps to Replace Halogen Ceiling Light Bulbs
- Step 1: Turn off the power completely to avoid injury. Turn off the light switch or fuse box breaker connected to the bulb.
- Step 2: Put on gloves or a rag to keep your hands from touching the bulb. You can shorten the bulb’s life with oils on your fingers.
- Step 3: Use a sturdy chair or ladder if the bulb is high up.
- Step 4: Wait at least 10 minutes before touch the bulb. Halogen bulbs get very hot when they’re lit.
It’s time to change the Halogen Ceiling Light bulb.
- Step 5: Find out what kind of Halogen Ceiling Light you’re replacing. You can get G4, GU10, and MR16 replacements, so make sure you get the right one. The type is usually printed on the bulb or fixture.
- Step 6: Turn or pull on the enclosure to loosen the bulb. You can twist some bulbs out, or you can clip them in. Remove the clip with needle-nose pliers.
- Step 7: This will allow you to see the wires when you lower the wiring.
- Step 8: You’ll need to twist the bulb if it needs to be pulled out. If it doesn’t twist, you can pull it straight out.
Installing the new bulb:
- Step 9: Remove the new C9 Bulbs without touching the glass.
- Step 10: Place the prongs of the upgraded bulb in the grooves in the socket and press firmly until secure. If the bulb has a twist mechanism, turn it to the right to lock it.
It’s time to test and finish. Turn on the power and check that the updated Halogen Ceiling Light bulb works. Throw away the old bulb properly.
Halogen Ceiling Light are dangerous, so don’t throw them away in the trash. Try a recycling center that accepts halogen bulbs or hazardous waste.
Can you replace halogen bulbs with LED?
You can replace halogen bulbs with LEDs. Just make sure you pick the right LED equivalents that match your existing halogen bulbs’ base type and size. LED bulbs have many advantages over halogen bulbs, including energy efficiency, longer lifespan, and a lower heat output.
If you want LED replacement, consider these things:
You need the same base type as your halogen bulb (GU10, MR16).
Check your halogen bulbs’ voltage (usually 12V) or line voltage (110-120V in the US, 220-240V in many other countries). Select LED bulbs that match this voltage.
Make sure LED bulbs are dimmable if you have halogen bulbs on a dimmer to avoid flickering or not dimming.
You can choose a color temperature to match your space, whether you want a warm, inviting light (lower K) or a cooler, more energizing light (higher K).
Find an LED bulb with the same brightness as your halogen bulb by looking at its lumens (lm) rating, not by comparing watts, since LEDs use much less power.
These factors can help you find LED bulbs that fit your existing fixtures, meet your lighting needs, and are energy-efficient.
Read Also: Easy DIY Rustic Open Box Light Fixtures Indoor In 10 Minutes
Are halogen bulbs better than LED?
No, LED bulbs are generally better than halogen bulbs. Halogen bulbs and LED bulbs serve different needs. Halogens are known for their bright, warm light and are often cheaper upfront, but they consume more energy and have a shorter lifespan.
LEDs, on the other hand, are more energy-efficient, last much longer, and are cooler to the touch, though they may cost more initially. Your choice between LED and halogen depends on your priorities, like energy savings or longevity.
Do you need to change the transformer for LED lights?
You might have to replace your transformer if your existing LEDs don’t work with your old transformer.
The reason is that LEDs use less power than halogens, which can cause flickering or not lighting up properly with old transformers. Make sure your LED lights have a 12V or 24V transformer (usually one that’s 12V) to work smoothly.
Read Also: DIY Lamp Repairs Guide-Top 10 Solutions To Lighting Problems
Is it worth replacing halogen with LED?
Yes, it is definitely worth replacing halogen lights with LED lights. LED lights are much more energy-efficient, have a longer lifespan, and produce less heat. They’re also eco-friendly and cost-effective.
Read Also: How To Hang A Pendant Light From The Ceiling (DIY): Simple 10 Steps Guide
How to change a 2 pin halogen light bulb?
A quick guide to changing halogen light bulbs.
Switch off the circuit breaker or switch that controls the light. You’ve got to wait at least 10 minutes for the bulb to cool down. Halogen bulbs get really hot. Use gloves or a cloth to avoid touching the bulb.
Remove the old bulb:
Push inward and twist counterclockwise to remove the bulb. After you disengage the pins, pull it straight out.
Install the New Bulb:
Line up the pins on the new bulb with the slots on the socket. Gently push the bulb in and twist it clockwise to lock it in.
Test the new bulb with the power on. If you’re able to recycle the old bulb, it’s best. Halogen bulbs could contain hazardous materials.
Read Also: How To Install And Maintain String Light Bulbs DIY: 6 Easy Steps
In conclusion, before purchasing LED Halogen ceiling light bulbs, ensure that the voltage, base, and dimming are compatible.
Additionally, choose the right color temperature and lumen rating to make sure the LED bulbs meet your lighting needs. If your existing transformer isn’t compatible with LED lights, you’ll need to replace it. You should recycle halogen bulbs if they contain hazardous materials when you change them.