Hanging gas lantern for outdoor: Why does my hanging gas lantern flicker?

0 0
Read Time:4 Minute, 48 Second

A hanging gas lantern for outdoor porches adds timeless charm, especially those on the coast. It creates a magical ambiance with its warm glow and soft flicker. But what if it starts acting up? There are reasons behind a misbehave outdoor gas lantern, and some troubleshooting solutions.

If you’re looking for the best hanging gas lantern outdoor, there are many styles and designs to choose from. Whether you have a traditional home or a modern setup, having a gas lantern for outside complements almost any exterior. A hanging gas lantern outdoor is more than just style – they’re built to last for all weather outdoor lanterns hanging.

Before you dismiss flickering woes and pick out outdoor hanging lanterns solar or a large outdoor hanging lantern. Let’s look at the causes and fixes for a flickering gas lantern.

Why do gas lights flicker?

Gas lights might flicker for a number of reasons. Here are the most common causes and possible solutions:

 flickering gas lights

Reasons for flickering gas lights

  • Loose Connections: Make sure the gas line connections are tight, and the mantle (the delicate mesh bag that produces light) is in good shape. If anything’s loose, tighten it up.
  • Drafts can cause the flame to flicker. You should consider a glass shield or enclosure if you’re exposed.
  • Problems with gas pressure lead to weak flames. For help, contact your gas provider.
  • It’s easy for mantles to get clogged with dust and debris over time. Follow manufacturer instructions for gentle cleaning.
  • Mantle Damage: A worn or torn mantle will flicker. A replacement mantle is usually inexpensive and easy to swap.
  • Faulty thermocouple (if applicable): Gas lights use thermocouples to control gas flow. It can cause flame instability if it’s malfunctioning. You might need a tech for this.

Do you leave Hanging gas lantern for outdoor always on?

It is not recommended to leave hanging gas lantern Outdoor Lighting With C9 Bulbs on all the time. There are a lot of things that can cause flickering, like fuel depletion, clogged mantles, or problems with gas pressure. Keep the lantern off when not in use to ensure its longevity and reduce flickering.

Troubleshooting hanging gas lantern flicker

Here’s a complete guide to troubleshooting hanging gas lantern flicker, including safety considerations and step-by-step instructions:

Troubleshooting hanging gas lantern flicker
Hanging gas lantern for outdoor

When you smell gas, turn your gas off at the main valve and evacuate. For urgent help, call your gas provider. Wait until the leak’s fixed before troubleshooting.

Lanterns can burn you if the mantle or metal parts get too hot. Make sure the lantern is completely cool before trying to adjust it.

Troubleshooting steps

Does your lantern get blown around by a fan or vent? If so, try:

Move the lantern to a sheltered spot. The flame can be protected with a glass globe or chimney.

Check Connections: Check all connections.

  • Make sure the gas line to the lantern is secure. You might need a wrench.
  • Make sure your lantern’s thermocouple (safety sensor) is firmly connected and positioned correctly.
  • Check the wiring on newer models with electronic ignition.

Replace or clean the mantle:

Look for hanging gas lantern holes, tears, or excessive buildup on the mantle. Replace it if it’s broken.

Follow manufacturer instructions to clean (if not damaged). The best way to do this is to gently burn off built-up deposits. You can watch videos online if you’re not sure.

Install the correct type of mantle for your lantern.

In case none of the above fixes it:

You might have low gas pressure. Contact your provider. Get help troubleshooting from your gas company.

How high do you hang a gas lantern?

The height at which you hang a gas lantern can vary. It depends on the specific circumstances and the desired lighting effect. However, as a general guideline, gas lanterns are typically hung at a height of around 6 to 8 feet for optimal illumination and safety.

Read Also: Can You Use Outdoor Lights Indoor? 4 Helpful Tips And Tricks To Light Your Home

How to turn off gas lanterns?

Find the small control valve near the bottom of the burner where the gas line connects to turn off a gas lantern.

Turn it clockwise until it stops – this shuts off the lantern’s gas. Before you leave, make sure the flame is out.

A modern gas lantern may have an electronic ignition switch; simply flip it to the off setting.

Read Also: How To Install Low Voltage Bollard Lights? Troubleshooting Outdoor Bollards.

What’s the best way to adjust a gas lantern’s flame?

Hanging gas lantern outdoor
Hanging gas lantern for outdoor | image source: towerlighting.com

Hanging gas lantern outdoor flames can be adjusted easily to maximize ambiance and fuel efficiency. You can do it this way:

  • You’ll find the valve at the base near the gas line connection on most gas lanterns. Looks like a knob or a slot for a flathead screw.
  • You can use a flathead screwdriver or your fingers to turn the valve gently. The gas flow is usually lower for a smaller flame when you turn it clockwise, while it’s higher when you turn it counterclockwise.
  • As you adjust, watch the flame. Try to get a consistent, softly flickering flame. Keep flames low so they don’t extinguish too easily, and don’t go overboard with big ones.

Read Also: Easy DIY Garden Solar Light Fix And Maintenance: You Can Do Today!

In conclusion, if your Hanging gas lantern for outdoor flickers, it could be due to a few reasons.

First, make sure the thermocouple is connected correctly and positioned. Next, check the wiring on newer models with electronic ignition. Finally, make sure the mantle is clean and well maintained. You can get a steady, flicker-free flame for your outdoor space by following these steps.

Happy
Happy
0 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %

About Author

Related Post

Average Rating

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Leave a Comment