0
0
Is your Samsung TV remote not working blinking red light? These quick and helpful tips will help you fix that issue.
This is a bit common problem with Samsung TV remotes.
How can remote flashing stop working? Here I have shortlisted a quick fix idea.
- Turn the television on and off.
- Powering down the blinking red light problem
- Check for physical damage.
- Power Cycle Your Samsung TV
- You can use SmartThings instead of the remote.
- Use the SmartThings app as a remote device.
Samsung TV Remote Not Working Blinking Red Light
What could be the cause of the Samsung remote blinking red?
If your Samsung TV remote not working and blinking red lights. Then there are the possible causes.
Low battery: The most common reason for a red blinking remote is low battery. You can try replacing the remote batteries and see if that fixes the problem.
Faulty remote: If you replace the batteries and the remote still blinks red, it may be faulty. Reset or replace the remote to fix the issue.
TV is turned off. Make sure that your Samsung TV is turned on. The remote blinks red if the TV is turned off and not connected.
Remote is not paired with TV: If the Samsung TV remote not working blinking red light. Follow the TV manual instructions to pair the remote. The red light blinks continuously.
Interference: A wireless router or microwave oven can cause interference. Move the remote away from these devices to fix the problem.
Firmware issue: The Samsung TV remote not working and blinking red lights after, or the remote may have a firmware issue. Make sure the firmware on both devices is up-to-date.
Check for stuck buttons.
Remove the batteries from the remote. Press each button on the remote individually. If you feel any resistance or the button does not depress all the way, then the button is stuck.
Use a toothpick or other small, pointed object to gently pry the button up. Be careful not to damage the button. If the button isn’t working, reinsert the batteries.
If the button is still stuck after you have pried it up, You can contact a qualified technician if you are uncomfortable prying up the button yourself.
Samsung TV Remote Not Working Blinking Red Light
Throw out the old batteries and get new ones.
The remote’s battery tray is on the back of the device. Then remove the old batteries and discard them properly. Put the fresh batteries in, making sure the positive and negative ends are connected. Close the battery compartment. Check the remote’s functionality.
Note: Use the same type of batteries that were originally in the remote.
Remove anything blocking the IR sensor on your TV.
An IR sensor is a device that detects infrared light. It sends signals to TVs and other devices from remote controls. On your Samsung TV, the IR sensor is located in the bottom center. Remote controls will not work if obstructions are blocking the IR sensor.
If your IR sensor is blocked, you can try the following steps to remove any obstructions:
Move any furniture or objects that are blocking the sensor. Softly wipe the sensor. If the sensor is still obstructed, try a flashlight. It will help the remote control signal reach the sensor.
After trying everything, replace the IR sensor if the remote control still doesn’t work. Samsung and third-party retailers sell IR sensor replacements.
How to Re-Pair Your Remote to Your Samsung TV
- Check that the TV is turned on.
- Point the remote at the TV.
- Stay on the remote’s Return and Play/Pause buttons for 3 seconds.
- The TV will display a message saying that the remote is being paired.
- After pairing, the TV beeps.
If the remote still doesn’t work after repair, reset it or contact Samsung customer support.
Samsung TV Remote Not Working Blinking Red Light
How to replace the remote Consider universal options.
The maker sells replacement remotes. It is the most costly choice, but it guarantees a TV-compatible remote.
Purchase a universal remote. A universal remote is more flexible since it controls different devices. However, programming the remote to work with your TV may take time.
Use a smartphone or tablet remote. Many applications provide phone or tablet TV control. This is free; however, a separate remote control may be more reliable.
Other Causes of a Samsung Remote Blinking Red
Damaged or obstructed sensor: The remote control has an infrared sensor that sends signals to the TV. If the sensor is damaged or blocked, the remote may blink red and no longer communicate with the TV.
The remote control’s buttons might become dusty or broken over time, preventing them from operating. Clean sticky or unresponsive buttons using a soft cloth.
Firmware update: Sometimes firmware updates create remote control issues. Roll back any TV firmware updates to see if they address the issue.
If the remote still blinks red after doing everything, there may be a hardware problem. If so, contact Samsung Customer Care for a new remote.
Alternate solutions to the red flashing on a Samsung remote
- If the batteries are fine but the remote doesn’t function, reset it. Press the remote’s back reset button with a paperclip.
- The remote won’t operate without a TV pairing. Follow the TV manual to connect the remote.
- Turn on the TV and set the input to the right source. You may also restart the TV.
- If the remote buttons are sticky or filthy, they may not operate. Clean the remote with a gentle cloth.
- If the remote still doesn’t function after all the aforementioned steps, replace it. Samsung or third-party retailers sell remotes.
Samsung TV Remote Not Working Blinking Red Light
FAQ: Samsung TV remote not working blinking red light
Why is my TV remote blinking red and not working?
A Samsung TV remote blinking red only power button works is usually caused by a low battery. You could try changing the batteries to see if that works. It may be the remote if the batteries are fresh and it still doesn’t function. If necessary, reset or replace the remote.
How do I reset my Samsung remote that is blinking red?
If your Samsung TV remote not working blinking red light not available. Then locate the small reset button on the back of the remote. It is usually a pinhole.
You can use a paperclip or something similarly pointed to push the reset button. Keep holding for the full ten seconds. The red light is turned off, and the remote beeps.
Reset the remote and link it with the TV again. This requires following the TV handbook.
If the remote doesn’t function after resetting, replace it.
Samsung TV Remote Not Working Blinking Red Light
How do I fix an unresponsive Samsung remote?
If the batteries are low or the remote isn’t receiving enough sunlight, your Samsung solar remote may blink red. In this situation, replace the batteries or move the remote to a place with more sunshine.
How do I reset my Samsung TV remote?
If your Samsung solar remote red light flashing, check the batteries. Replacement low-voltage batteries New batteries require cleaning the solar panel or moving the remote to a sunny spot.
If the remote is still not working, reset it or replace it.
Bottom Line: Samsung TV remote not working blinking red light
I hope the above guidelines will help you identify and fix the Samsung TV remote not working blinking red light. After attempting these steps, if the remote still doesn’t work, you may need to contact Samsung’s customer service.
READ ALSO; Sony TV Blinking Red Light 6 Times: What To Do? Here’s The Fix!
Author Info
Average Rating