Simple DIY Steps: How to Connect an Electrical Outlet with Night Light

Tired of trying to navigate in the dark? Want to see better at night? Here’s a simple solution. An electrical outlet with night light is the answer! These clever devices offer soft, guiding light without bulky fixtures or harsh overhead lighting.

Ready to upgrade? In this blog post, we’ll cover how to connect an electrical outlet with night light. We’ll also discuss how to install a Leviton outlet with 3 wires or 4 wires. And other key instructions like how to install a Leviton GFCI outlet.

It’s easier than you think! It’s time to make your house safer and more comfortable.

connect an electrical outlet with night light

Always turn off the power to your circuit breaker box. Make sure it’s safe with a non-contact voltage tester. There are a lot of outlets with nightlights made for Leviton and Legrand.

Here’s what you’ll need: screwdrivers (flathead and Phillips), wire strippers, and a non-contact voltage tester.

Steps to connect an electrical outlet with night light

Remove the old outlet:

Remove the existing outlet cover plate, and unscrew the outlet from the box. Carefully detach the wires and note their positions (take a photo for reference).

Identify the wires:

The hot (black) wire carries electricity. The neutral wire (white) returns electricity to the circuit panel. It serves as a safety wire to divert electricity in case there’s a problem.

Install Your New Electrical Outlet with Night Light:

• Check your outlet’s instructions: Leviton 15a-125v outlets may come with wiring diagrams or installation instructions. Each Legrand outlet will have its own rules.
• Connect the Nightlight Feature: Most outlets have an extra wire or tab for the nightlight. You’ll need to consult your instructions.
• Wire the Outlet: Strip each wire’s end, following Leviton’s easy-to-wire plug instructions or your outlet’s diagram. Make sure the wires are wrapped around the terminals on the outlet.

Secure and Test:

Place the outlet in the box and screw it into place. Replace the cover plate. Turn on the breaker. Check your outlet’s functionality and nightlight.

Read Also: 4 Easy Ways To Fix Dimmer Switch Outdoor Problems With Light Fixtures

Important Notes:

Check the Leviton outlet wiring diagram for your chosen model if yours seems complicated (e.g., there are four wires instead of three). Leviton GFCI outlets are designed for wet locations (kitchens, bathrooms). They have extra safety features.

Read Also: How To Replace A Mobile Home Light Switch? Mobile Home DIY

How to install a Leviton outlet with 3 wires?

Make sure the circuit breaker is off for the outlet you’re working on. Make sure there’s no power with a non-contact voltage tester.

Disconnect the old outlet: Unscrew the cover plate and the outlet itself. Mark the wire positions.

Identify the wires: Black (Hot), White (Neutral), Bare copper/green (Ground).

Prepare a New Leviton Outlet: Check the outlet’s wiring diagram for specific instructions (usually found on packaging or Leviton’s website).

How to Connect the Wires:

• Use your wire strippers to strip wire ends.
• Turn the black wire clockwise around the brass terminal on the outlet and tighten it.
• You’ll need to wrap the white wire clockwise around the silver terminal and tighten it.
• Make sure the ground wire is tight around the green terminal.

Put the wires back in the box, mount the outlet, and install the cover plate. You’re done!

How to install a Leviton GFCI outlet?

GFCIs protect against electrical shock in wet locations (bathrooms, kitchens, outdoors).

Here’s how to do a 3-wire outlet, but with a few differences:

LINE vs. LOAD terminals: GFCIs have LINE terminals for incoming power and LOAD terminals for downstream outlets. Follow the diagram closely.

Once installed, press GFCI’s TEST button (it should trip), then the RESET button to restore power.

Consult Leviton’s Instructions: Each outlet model may have different configurations and wiring diagrams. Refer to Leviton’s official website for model-specific instructions.

Read Also: 4K WiFi Hidden Camera Wall Outlet With Night Vision: Does It Really Work?

In conclusion, installing an electrical outlet with night light can improve visibility and safety in your home.

There are some easy steps to install Leviton light fixtures or Legrand lights. Enjoy a well-lit home, no more stumbling in the dark. Say hello to a brighter, safer living space!

Author Info