Do you have mysteriously dark pool lights at night? Why one led pool light not working? Don’t let them ruin your evening swim! This frustrating problem can have many causes, from simple fixes to complex ones.
This guide covers everything from an inground pool light that doesn’t work to an Intex pool light that doesn’t help to a flickering LED light.
We’ll look at the most common reasons why your pool light isn’t working. We’re going to show you how to troubleshoot issues like a bad bulb, faulty wiring, or a transformer problem. You can learn how to reset pool lights too!
You can ask us for targeted solutions if you have a specific issue, like a Pentair LED pool light not working or one LED pool light not working.
Get ready to say goodbye to dark pools and enjoy relaxing nighttime dips again!
Why is your pool light not working
Here’s how do I know if my pool light fixture is bad?, plus some safety tips:
You should turn off the power to the pool lights at the circuit breaker before doing anything else. If you’re not comfortable working around water, call a qualified pool electrician.
Read Also: Solar Pool Heaters Vs. Gas Heaters: Which One Is Right For You?
Troubleshooting Steps: how to reset pool lights
Check the Circuit Breaker and GFCI Outlet:
See if the LED pool light flickering circuit breaker has tripped. If so, reset it.
GFCs (ground fault circuit interrupters) protect you from electrical shock. If the pool light outlet is GFCI, test and reset it if necessary.
Burnt-out bulb:
This is the most common problem. Inspect the bulb; if it’s blackened or has broken filament, it needs replacement.
For pools with multiple lights, try swapping a suspected faulty bulb for one from a working light to be sure.
Water in the fixture:
- Unscrew a single screw and pull the light fixture out of its niche to remove the fixture.
- Inspect the fixture for leaks. If you find any, dry everything thoroughly and replace damaged gaskets and seals.
- Make sure there are no cracks or damage to the fixture itself.
Faulty wiring or connections:
Open the light fixture and junction box. Check all wire connections to ensure they’re tight and secure.
Look for damage to the wires; wear, cuts, or corrosion can all hinder operation.
Bad Light Switch:
Check to see if the pool light works when you turn it on and off. Listen for a clicking sound or measure the voltage.
Failed Transformer:
There are some pool lights with transformers to reduce voltage. If the transformer isn’t working, replace it.
Read Also: How Do Solar Pool Lights Work? Want To Try These 5 Solar Pool Lights
What is the lifespan of a pool light?
The lifespan of a pool light varies depending on the type of light and its use. LED pool lights last 30,000 to 50,000 hours on average, while traditional incandescent or halogen lights last 1,000 to 5,000 hours.
It’s very crucial to note that proper maintenance and regular cleaning can extend the lifespan of a pool light.
How to fix One led pool light not working?
To fix one LED pool light not working, first check the power supply and make sure it’s connected and working properly.
Next, check the light fixture for damage or loose connections. If everything seems in order, the LED bulb may need to be changed, since it may have reached its end.
Pool light transformer troubleshooting
Here’s a guide to troubleshooting your pool light transformer. Remember, always turn off the power to the transformer at the circuit breaker.
Common Transformer Issues:
- The lights won’t even turn on.
- Light flickers, dims, or doesn’t work right sometimes.
- There’s a lot of heat coming from the transformer.
- Transformer humming/buzzing: Unusual loud noises.
Troubleshooting Steps:
Check voltage and wattage:
Verify the transformer gets the right voltage by using a multimeter (usually 120V in the US).
The transformer lowers the voltage for the lights (usually to 12V). Make sure it’s making the right voltage with a multimeter.
Check the transformer’s wattage rating. Underpowered transformers can cause problems.
Inspect wiring and connections:
Make sure the transformer terminals are secure and corrosion-free. Tighten loose connections and clean corrosion if necessary.
Check the junction boxes between the transformer and the lights for loose or corroded connections.
Tap Testing:
Transformers have multiple voltage outputs (like 12V, 13V, 14V) to compensate for voltage drop.
When the power is off, change the wire connection to the next highest voltage output. That sometimes fixes dimming.
Consider Age and Condition:
Your transformer could be failing if it’s old or has seen extreme weather.
Look for cracks, burns, etc.
Do you think you can fix a pool light without draining it?
Fixing a pool light usually doesn’t require draining the pool. Here’s why:
Why It’s Possible? The lights are waterproof and can be submerged to prevent damage.
Its shallow niches are designed to house light fixtures. If not, you can work at chest depth rather than draining the whole pool.
How to Fix It: Pool light without draining the pool
For your safety, shut off the power at the breaker for the pool lights.
It’s easy to pull up a pool light if you unscrew the one screw holding it in the niche.
Troubleshoot and fix:
- Check your bulbs and replace them if they’re bad.
- Check and replace the gaskets around the lens if they’re torn or aging.
- Make sure any wiring inside the fixture is secure.
- Make sure the light works before reinstalling. Plug it into a GFCI-protected outlet if you can.
- Attach the fixture to the pool wall again.
When You Might Need to Drain the Pool:
A major leak might require partial draining if there’s a crack in the niche itself.
The wiring may need extensive repairs if the problem goes back to the electrical panel (rather than directly within the fixture).
Read Also: 10 Cool Hot Tub Light Ideas That Will Transform Your Spa Experience
In conclusion, if you’re experiencing issues with your pool light not working, it’s worthwhile to troubleshoot the pool light transformer.
Transformers convert electrical current and provide it to lights. It is possible to identify and fix the problem, so your pool light shines again. Check the power supply, inspect the wiring, and test the transformer.
Read Also: How To Install Long LED Pool Cage Lighting For Above-Ground Pools
Average Rating