Exterior garage lights add safety and aesthetic appeal to your home. They help you see at night and secure your home. Outside garage lights turn out due to electrical or weather problems. Alternatively, you may encounter an outdoor garage light motion sensor. Why is my outside light not working but working?
In this blog, we’ll discuss common LED exterior garage light issues and how to fix them. Our goal is to help you keep your lights working as they should.
Electrical issues: exterior garage light
When your exterior garage lights stop working, it’s often due to electrical problems. Here’s a simple guide to fix these issues:
Circuit Breaker Problems
If your lights turn off, check the circuit breaker. This is a switch on your electrical panel. Flip it to ‘ON’ if it’s off.
If flipping the switch doesn’t help, you might need to replace the circuit breaker. It’s advisable to get a professional to replace it.
GFCI Reset: How to reset a GFCI outlet?
GFCI is a special outlet that prevents electric shocks. They are often found in garages as well.
You can reset your lights if they aren’t working. Just press the reset button on the GFCI outlet. This might fix the lights, but if not, you’ll have to replace the outlet.
Wire Damage Tests and Repairs
You should check your wires for damage, such as cuts or wear. Turn off the power before doing this.
You can cover a small cut with electrical tape, but a big one needs to be replaced.
Outlet testing: How do you test an outlet?
Sometimes the problem is with the power outlet. Plug something else into the outlet and see if it works.
If nothing works in the outlet, it may need to be replaced. This is a job for a professional if you’re not comfortable with electrical work.
Don’t try to work with electricity if you don’t know what you’re doing.
Light Fixture and Bulb Problems
Some of the most common Lowe’s exterior garage light problems are bulbs and fixtures.
Bulb burnout is annoying, isn’t it? Maybe the bulbs aren’t right for your power supply. Select bulbs that are right for your light fixture. This simple change can save you time and money.
Check the light fixture
You’ve seen broken parts and rust. Check your light fixtures. Tighten anything loose and clean off any rust. If there’s too much rust, it might be time to replace them.
How to fix LED light interference with garage door openers
Do you recall a time when your garage door acted weird after you switched to LED lights? It happens! LEDs can mess with your garage door sensors.
Try using a different bulb, or moving your outdoor garage lights motion sensor. Sometimes it’s all about finding the right spot.
It’s all about staying on top of things to keep your garage lights working.
Sensor and switch issues: What causes the sensor to malfunction?
Light and motion sensors don’t work
Sometimes outdoor garage lights’ motion sensors get quirky. To check, cover the sensor briefly and see if the light reacts. If it doesn’t, clean the sensor gently or adjust its settings. Still no luck? It might need replacing.
Switch testing and replacement
Think your light switch won’t work? Turn off the power, and peek inside after removing the cover. Use a tester to see if it’s getting power. If it’s not, you might need to play handyman and replace it. Follow the instructions carefully.
Is your photocell sensor acting up? Cover it up; if the light doesn’t come on, clean it or consider swapping it out for a new one.
Solving these small mysteries can be quite satisfying and keep your exterior garage light in tip-top shape!
Factors and Maintenance: LED exterior garage light
- Make sure your fixtures are sealed to keep critters away.
- Moisture is a fixture’s enemy. Protect fixtures with rust-resistant fixtures or protective coatings.
- Keep your lights bright with regular cleaning. Tighten loose screws and replace worn parts to keep everything running smoothly.
- Your exterior garage light will stay bright and functional if you maintain it.
How to troubleshoot advanced problems
Do you have a timer or sensor on your lights? Sometimes they need a tweak. Check the timer settings to ensure they match your needs. For sensors, adjust their sensitivity so they turn on and off just when you want them to.
Verify the neutral wire
It might be the neutral wire that is causing your lights to malfunction. It can cause issues if it’s loose or damaged. Make sure your connections are tight, and call a pro for help if you’re not sure.
These advanced steps can often solve those tricky problems and get your lights back to working properly.
FAQs: Exterior garage light
Are there motion sensors on outdoor garage lights?
Yes, many outdoor garage lights come equipped with motion sensors. These sensors detect movement and automatically turn on the lights when someone approaches the area. This feature provides added security but also conserves energy by only illuminating the area when needed.
Why is my outside light socket not working?
There could be several reasons why your outside light socket is not working. It could be due to a faulty socket, a loose connection, a blown fuse, or a tripped circuit breaker. Make sure you address these potential issues with your outside lights.
Why are my outside lights not working after rain?
You might find that your outside lights don’t work after rain because of water damage or moisture infiltrating the electrical components.
How to test an outdoor light fixture?
The first thing you can do is check the power supply for an outdoor light fixture. Make sure the circuit breaker or fuse isn’t tripped or blown. You can then check if power reaches the fixture with a voltage tester. The fixture might not work despite having power, so you’ll need to replace it.
In conclusion, fixing exterior garage lights usually means checking breakers and wires, or adjusting settings. Always be safe – if you’re not sure what to do, call a professional.
Keep an eye on your lights and care for them regularly. This way, they’ll keep your home bright and safe.