Whirlpool oven light won’t turn off: What to do? 6 Proven Fixes

0 0
Read Time:6 Minute, 4 Second

Is your Whirlpool oven light constantly on, even after turning it off? Whirlpool oven light won’t turn off is a very common problem, but it can be fixed easily with these tips.

In this blog post, we’ll walk you through six proven solutions to get your Whirlpool oven light back to normal.

I will also let you know how to turn off my Whirlpool oven light. I will also let you know where the oven light switch is on a Whirlpool electronic oven. So, dim the lights, grab a screwdriver (just in case), and let’s go!

6 proven solutions for Whirlpool oven light won’t turn off

Check the light bulb.

A burned-out bulb is the most common reason a Whirlpool oven doesn’t turn off. You have to replace the bulb with one that matches your oven’s wattage and type.

How do I replace the Whirlpool oven light bulb?

Whirlpool oven light bulbs can be replaced in a few minutes. Before you start, turn off the power to your oven at the breaker box.

Here’s a quick guide:

  1. Locate the light bulb cover. At the back of the oven, it’s usually a glass or plastic panel.
  2. Unscrew the cover. Generally, covers rotate counter-clockwise; however, if uncertain, consult the manual for your oven.
  3. Remove the old bulb. Turn the light bulb counterclockwise with care.
  4. Replace it with a new bulb. Use a light for your device that has the same type and power as the old one. The bulb will last less if you don’t touch the glass with your bare hands.
  5. Screw in the new bulb. Turn it clockwise until snug.
  6. Screw the cover back on until secure.
  7. Turn the power back on at the breaker box.

Don’t hesitate to call a qualified appliance repair technician if you don’t feel comfortable changing the bulb yourself.

Close the oven door properly.

You might keep the light on if you don’t close the oven door completely. You should check to see if the door closes flush and if the hinges are not bent.

Reset the oven.

Whirlpool oven light won’t turn off? Sometimes, a simple reset can fix electrical glitches that may cause the light to stay on. Then turn it back on after turning it off for a few minutes at the breaker box.

How to reset Whirlpool oven light?

Whirlpool oven light won't turn off
Whirlpool oven light won’t turn off

While there’s no dedicated reset button for the Whirlpool oven light, there are two options for fixing a problem:

1. Power cycle the oven:

Turn off the oven breaker for at least 30 seconds. This cuts off all power to the appliance.

Turn the breaker back on to restore power.

2. Check the control lock.

Consult your Whirlpool oven manual to see if it has a control lock feature. This feature might disable the light switch.

Locate the control lock button on your control panel (the exact location should be in your handbook).

Press and hold the button for 3 seconds to deactivate the lock, potentially allowing the light switch to function normally again.

Other troubleshooting techniques, such as inspecting the light bulb, door switch, or control panel, may be required if these solutions fail to resolve the issue.

Inspect the door switch.

Open and close the door to turn on and off the light. Whirlpool oven light won’t turn off if the switch is broken, it might stay on even when the door is closed. To check if the switch is working, you can use a multimeter.

How do I test the Whirlpool Oven Door Switch with a multimeter?

Safety first! Before working, unplug your oven or turn off the breaker switch.

Here’s how to test your Whirlpool oven door switch with a multimeter:

You’ll need a multimeter set to continuity settings and a flat-head screwdriver (optional).

Consult your oven’s manual or search online for your specific model. It’s typically near the door hinge or frame.

Now how do I access the switch? You might need to remove screws or panels to reach it. Please refer to your manual for instructions on disassembling your device.

You need to identify the terminals. The switch should have two or three terminals. Look for markings like “C” (common), “NO” (normally open), and “NC” (normally closed).

Test the switch.

With the oven off, touch one multimeter probe to each terminal. If the switch works properly:

  • Two terminals: You should hear a beep when the door is closed (completing the circuit) and no beep when the door is open.
  • Three terminals:

Touch the terminals that are normally closed (NC) and common (C). There should be a beep. You can now open the door. After a few seconds, the beep should stop.

Normally open terminals (NO) should not be touched, but the common terminal (C) should be touched. There shouldn’t be a beep when the door is closed. Be sure to close the door. You should hear a beep.

If the switch fails the test, replace it with a compatible model following your oven’s manual. You can also consult a qualified technician for assistance.

Remember, if you’re unsure about any step, consult a professional.

Check the control panel.

It’s possible that the control panel is broken if the light switch and bulb work fine. The wiring board that runs all oven features, including the light, is on the control panel. A skilled appliance repair person will need to change a control board that isn’t working right.

Read Also: 10 Simple Steps For Vacuum Cleaner Motor Replacement: Fix It Today And Save More.

Is there a way to change Whirlpool oven controls?

How to use the control panel on your Whirlpool oven depends on the model. However, most Whirlpool ovens share some common features:

Basic functions:

  • Oven knobs: These control functions like bake, broil, and self-clean. Turning the knob selects the function, and another knob or digital display controls temperature and time.
  • Timer: This sets a cooking duration or acts as a kitchen timer.
  • Start/Cancel button: Starts or stops the selected cooking function.

Advanced features (It depends on the model):

  • A digital display shows the temperature, time, and other data.
  • It is used to log cooking times and temperatures on a number pad.
  • You can scroll through the options and menus with the navigation buttons.
  • Buttons with special features such as “convection” or “proof” may be available.

For the most accurate information, refer to your Whirlpool oven’s user manual. You’ll get diagrams and detailed instructions specific to your model, so you can use your oven safely.

Read Also: How To Replace Low Voltage Light Switches? 5 Proven DIY Steps

Consult a qualified appliance repair technician.

Whirlpool oven light won’t turn off yet? You should always hire a Whirlpool over repair specialist if you are in doubt about how to resolve the issue. You can count on them to fix your oven light safely and quickly.

Read Also: How To Light A Gas Oven With An Electric Starter

In conclusion, a Whirlpool oven light won’t turn off is a pain, but it’s usually something you can fix yourself.

These six proven fixes should help you get your oven light back to normal and enjoy hassle-free cooking. Don’t forget to prioritize safety and ask a professional if you need help.

Happy
Happy
0 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %

About Author

Related Post

Average Rating

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Leave a Comment